Manx Club

I've had the same problem with our Tow'd if it hasn't been ran in a while. I found the problem is that the points oxidize
(or something like that) from sitting, a piece of 600 grit sandpaper between the points and it stated right up.

After 5 1/2 years DS025 was finally up and running (I say running since there never really finished) just in time for Big Bear. 4355 4352 4353 4351 After putting about 300 miles on the Dual Sport we only had a few minor issues, I'm really impressed by the drive ability of the Subaru. So far all the ...

With Big Bear fast approaching I thought I'd post an update.



Transmission ready for installation.





Motor back from Outfront and ready for installation.



Front suspension pretty much done.



Next major project will be wiring

Big Bear or Bust.

We'll I thought it was about time I posted an update, I finally finished the fabrication and got the chassis to the powder painter in January. Now the fun part, putting it all together for the final time. 3904 3905 3906 Greg & Jeanne Lewin Member 2805 Tow'd 1679 Dual Sport DS-025 (coming soon)

Hello David,

It looks like you've found a nice unmolested Tow'd. The frame horn angle is determined by the tabs that go from the
frame to the upper shock mounts. The frame horns do not sit completely level they do tilt up a little.

Greg

Hi Joe,

Great pictures, I think you have next years Christmas card.

Greg

Hi Artie,

I bought it from Pegasus Racing Supplies http://www.pegasusautoracing.com. There called "Seal-it firewall gromments,
they come in different sizes the 3/4 ID part number is 4336-001-750.

Merry Christmas
Greg

We'll progress has been slow but I must be getting close because I running out of things I need to buy. I just ordered the seat belts from PRP and the Transmission is out getting put together. 3353 3354 I'm hoping to get the motor down to Outfront Motorsports in the next week or two and the chassis ...

Hi Artie,

I measured mine tonight and with the chassis level the radiator angle is approx. 19 degrees.

Greg

This is a picture of the radiator mount without the radiator installed and another with the top mount a little more visible.





I think the aluminum colored bracket you are referring too is the side of the radiator.

Greg

Hello Artie, I recently just completed mounting the radiator on our Dual sport 025. I first mounted the wing and then made the radiator mounts fit the wing angle. The top of the wing hinges off the body and I made some brackets to mount the sides. Are you using the Ron Davis radiator he makes for th...

Mike & Lori Ann,
Congratulations the fun part is just starting, just make sure you don't finish before I do.


Greg & Jeanne Lewin
Member 2805
Tow'd 1679
Dual Sport DS-025 (coming soon)

Hi Jeff, I'm running the hanging pedal option offered with the dual sport kit. The gas pedal is from Jamar and will mount to the aluminum sub-floor. I'll use a standard jacketed aftermarket cable. Since your chassis is set up for stock VW pedals you could use the stock pedal set up just remove the b...

Progress has been slow but still moving forward, that "Food and Shelter" thing keeps getting in the way. I had the gas tank made by Boyd's Welding in Florida, I can't speak highly enough about these guys, after sending him some drawings and a conversation on the phone the tank showed up in...

Good job guys, welcome home.



Greg & Jeanne