Manx Club

Quick question for all that have worked with fiberglass. Sanding the 5 layers of paint off the buggy and two layers of paint off the sides, I noticed there are a couple of low spots in the side that I would like to straighten, (glazing putty on a regular car would work). Can I rough up the sides and use resins to build it up or is there a better way? Don't want it to seperate later and show through the paint.

If the low spots are not too deep (1/16" or so) use a good quality body filler. Or apply a few layers of glass cloth and finishing resin and sand out. Either will work Contact Tap Plastics if in CA. They can help you with the details

thanks for the info, Contact Tap Plastics is on the wrong coast for me.