Page 1 of 1

Orange heavy metal flake

Posted: Fri Sep 08, 2006 2:17 pm
by delsol
I am getting close to spraying the shell of my manx and was wondering if there was an original orange metal flake color that Manx used? The original shell was plain orange, and looked good -- but I'm thinking of going old school on this so it really shines in the sun! If there was not an original color -- does anyone have any suggestions? I will be going to the paint supply place next week to look through the house of colors catalouge, just trying to do a little homework. Thanks for any input. Dave

Posted: Fri Sep 08, 2006 3:06 pm
by CairoManx
Here is an older thread in the tech area that has info. http://www.meyersmanx.com/forums/showthread.php?t=4064

Posted: Fri Sep 08, 2006 4:11 pm
by 90volts
I went with the House of Kolor orange flake in the standard size-the largest. It's F18. http://www.hokpaint.com/scripts/depot.e ... chip15.bbx But I went with a blck base coat to get a copper color. You should use their matched orange base to get a real orange. But the quality and flake is very nice. here's a pic where you can kind of see the sparkle. but pictures don;t really do it justice to what it looks like in person on a sunny day. Image

orange flake

Posted: Sat Sep 09, 2006 10:20 pm
by Gary1719
hey 90 volts do you have a shot of that in the sun to show it a little better. gary 1719

Posted: Sun Sep 10, 2006 10:42 pm
by 90volts
can't really capture it that well, but here are a coupel of shots. Image Image

Posted: Mon Sep 11, 2006 4:01 am
by 167luckycharm
Hey Mike! Awesome flake job! Looks like the surface is still wet. How many coats of clear did it take to get it so smooth? Absolutely beautiful! John.

Posted: Thu Sep 14, 2006 3:02 am
by delsol
Thanks for all the replies guys, I think i have narrowed it down to Tangelo Orange -- large flake--. It's a real bright orange tangerine color, I'm thinkin stainless roll bar and polished aluminum shjould set this off pretty well. I haven't locked the rims in yet, once i see it together the rims will come to me -- my painter is telling me chrome 5 spoke cragars but i want to see it together first. Thanks again! Dave

Posted: Thu Sep 14, 2006 8:49 pm
by 167luckycharm
Hi Dave, The Cragar S/S wheels are right at home on a Manx. They make the car look "street" while a set of Centerlines gives the car that "race" appearance. I purchased new set of Cragars in '04 from Summit Racing and was shocked to find that the chrome 5 spoke section had metal weld splatter stuck to the surfaces. The chrome looked nice and deep. The back of the wheels are painted silver, not chromed at all. The alloy centers have steel bars cast into the outer edge and are welded to the outer wheel. That's where the rust started. I have a set of Centerlines, but need to buy a set of tires to mount first before I can install on the car. Good luck!

flakes

Posted: Sat Sep 16, 2006 5:23 am
by Gary1719
Thanks for the pictures mike, the flake jumps out at you Gary

Posted: Mon Sep 18, 2006 3:38 am
by 90volts
yeah, got a good shot this morning. must have been perfect light angle for the camera. Image

Posted: Tue Sep 19, 2006 7:56 pm
by House
Sweet color! Are those seats the 'lil sportsters or the standard sized ones?

Posted: Tue Sep 19, 2006 10:49 pm
by 90volts
the regulars. prp premiers.