Manx Club

Are there differences in weld in adjusters for front beams? If there are who has what i should use or you recommend.

You can get the Saw-A-Way adjusters through Kar-Tek http://www.kartek.com/Index.html or McKenzies http://www.mckenzies.com/. The Sway-A-Way's will be a better quality than the Empi adjusters. The Empi's would probably be fine for most buggy applications unless you are planning some rough off-road use.

Oops, I got the wrong link in the last post. Here is the Avis adjuster selection: http://www.appletreeauto.com/search.php ... rch&page=1

Thanks for your help gentleman!

Avis adjusters take more fitting but you dont need to cut the beam and weld them in so the beam retains most of its original strength. http://www.appletreeauto.com/search.php ... rch&page=1 If you're mean like me you can just cut, turn and re-weld a 2" section of one or both axle tubes, I find about 3/8"-1/2" on each tube does it...

Are they all the same or are some better than others. i heard they are all pretty much made in China.