My ToyBug

If you have a photos of your buggy then show off your stuff.
villemi
Posts: 27
Joined: Sat Mar 05, 2016 9:30 pm

My ToyBug

Post by villemi »

Hello
I live in France and I've baught a Manx Buggy which come from Grand Saline Texas USA.
This Buggy was the Jimmy Clyde Davis 's Buggy.
He was a member of this forum.
I'm looking for informations (pics , family ...) of the Buggy and Jimmy.

Pics and a video of the car below.

Image

Image

Image

Image

villemi
Posts: 27
Joined: Sat Mar 05, 2016 9:30 pm

Re: My ToyBug

Post by villemi »

Some news of the ToyBug

The engine had leaks and need a restoration

Disassembling of the engine: what a pleasure on a buggy!! :D

Image
Image

I benefit from it to put a small coat of paint at the back frame

Before:

Image

After:

Image

Cleaning and repair of the carburettors:

Before:

Image
After:

Image

Cleaning of the other parts

Image
Disassembling of the engine:

One deals initially with the cylinder heads with disassembling of the valves and a good cleaning of black painting

Image
Image
Image
Image
Image

Reassembly of the valves

Image
Image
Image
Image

Image

the pistons are in good shape

Image
Image
Image
Image
Image
Image
Image
Image

The crankshaft is a top-of-the-range model

Image
Image

Now it is reassembly.
a new camshaft Engle 110

Image
Image
Image
Image
Image
Image
Image
It's shining !!!

Image
Image
Image

Cleaning of the gearbox

Before:

Image

During:

Image

After:

Image
Image
andygere
Posts: 50
Joined: Thu May 14, 2015 6:25 pm
Location: Santa Cruz, CA

Re: My ToyBug

Post by andygere »

Really nice buggy, and it looks like a thorough reconditioning. Please continue to post progress, I'm enjoying all the detailed photos.
villemi
Posts: 27
Joined: Sat Mar 05, 2016 9:30 pm

Re: My ToyBug

Post by villemi »

Continuation of the works

Be thought of 2 sons of the engine towards the dashboard as the connection of the witness oil pressing of the meter and the spare thread for an account tours.
On a buggy you go to see it is simple much much more!!!

Passage in the sheath driving compartment

Image
Image

Then it is necessary to pass wiring underbody. With the tubular frame Berrien it is a game of child

It is necessary to remove all the same 57 live of the sheet steel of protection.

Image
Image

I am going to take advantage of it to put a small coat of paint on the frame

Passage of cables 5mn: it is better all the same that the beam of the karmann:lol!:
AND yes the floor is wooden!!

Image
Image
Image

It does not more remain than to stand out from the frame in the girdle to go back up towards the dashboard.

Image

A little works renovation of the sheet aluminium steel under frame.

Before

Image

After many hours of "elbow grease"

Image

A new part for my buggy manx

Image
villemi
Posts: 27
Joined: Sat Mar 05, 2016 9:30 pm

Re: My ToyBug

Post by villemi »

Continuation of small work on the Buggy

Assembly of the scout of plate provided by TFabs with the Buggy

Image

After a few hours of polishing the result is not bad

Image

I thank Alain Delaunay who could provide me the dimensions and pitch circle diameters

Image

Image

Before drilling

Image

Boring template

Image

After Before drilling

Image

Finished assembly

Image

Image
villemi
Posts: 27
Joined: Sat Mar 05, 2016 9:30 pm

Re: My ToyBug

Post by villemi »

Here the continuation about which I spoke to you yesterday.

The idea is to have a support of plate sufficiently rigid to maintain the plate and rather flexible so that in the event of small shock that does not cause a damage
A little the spirit the plates of motorcycle
There remained to me a piece of joint of bottom of door of garage

Image

Side view

Image

To bore it to fix the plate at it

Image

then to bore it to take again fixings of the scout of plate.

Image

And here is the result

Image

Sight from under

Image
User avatar
5150bossman
Posts: 606
Joined: Thu Apr 01, 2010 5:00 am
Location: So Cal

Re: My ToyBug

Post by 5150bossman »

Looking good! Won't the rubber allow the plate to move around a bit much? Might cause damage to the paint if it does.
villemi
Posts: 27
Joined: Sat Mar 05, 2016 9:30 pm

Re: My ToyBug

Post by villemi »

Not the number plate does not move much. It is very rigid
villemi
Posts: 27
Joined: Sat Mar 05, 2016 9:30 pm

Re: My ToyBug

Post by villemi »

you are right rubber is not a good idea. the number plate touches the alternator.

The engine found its place with a new exhaust.
There remain some completions wiring and connection of the pressure gauges.

Image

Image
User avatar
5150bossman
Posts: 606
Joined: Thu Apr 01, 2010 5:00 am
Location: So Cal

Re: My ToyBug

Post by 5150bossman »

Very nice. Looks like you have the oil filter directly to the oil pump. That will cycle very little oil through the filter as it just re-circulates the same oil over and over (the pick-up is directly next to the discharge). Not a true full flow. If you get the opportunity, you could get the case drilled and tapped for true full flow for better filtration.
villemi
Posts: 27
Joined: Sat Mar 05, 2016 9:30 pm

Re: My ToyBug

Post by villemi »

When I saw the Buggy on Internet it interested me.
The look all I liked the color.

I thus learned that it came from Texas of the town of Grand Saline and that it belonged to Jimmy Clyde Davis carpenter with the retirement.

Jimmy and is his wife Donna had 2 Manx Buggies

here:

Image

Image

Their Buggies won prices at the time of gatherings in Texas
Unfortunately Jimmy fell seriously sick and he died on September 8th, 2015.

I thus decided to tribute Jimmy by creating goodies which would be installed on the hardtop.

I called on Rascalscats and after many exchanges by e-mails, of sketch, prototypes one arrived from there so that you will discover.

After a few months here the result.

Image

Image

Image

Image

Image
belfi
Posts: 2
Joined: Sun Apr 02, 2017 11:00 pm
Location: UK
Contact:

Re: My ToyBug

Post by belfi »

OMG I love it - the colour is just stunning and with a glitter looks even better! The great one - thanks for sharing!
villemi
Posts: 27
Joined: Sat Mar 05, 2016 9:30 pm

Re: My ToyBug

Post by villemi »

News of the ToyBug
After a big update of the wiring (indicators, warning lights, senders) new improvements were brought.
First of all organized by manometers VDO instead of motometer

Before:
Image

After:
Image

Mounting of the new Cragar wheels:

Image

Image

Image

Image

Image

Image

Image

The continuation very soon!!!
User avatar
5150bossman
Posts: 606
Joined: Thu Apr 01, 2010 5:00 am
Location: So Cal

Re: My ToyBug

Post by 5150bossman »

Looking good! Do you have it on the road yet?
villemi
Posts: 27
Joined: Sat Mar 05, 2016 9:30 pm

Re: My ToyBug

Post by villemi »

Thank you.
Not yet.
Thé next is the hardtop.
Post Reply